Molly Bather bath lift - the unique British-Made, affordable bathing aid.

bath lift header FITTING TIMBER FRAMED WALL LATH & PLASTER WALL STUD PARTITION WALL CHECK WALL DRILL WALL FIT RAIL SCREW TO FLOOR TEST SYSTEM

In our 'FITTING HANDBOOK' you will find suggestions of
how to install your Molly Bather to various types of wall and bathroom.
Please click on the 'MOLLY DOWNLOADS' link (left) to download handbook.

CHECK WALL
Using a stud finder, check walls for
pipes, wires or timber uprights.


DRILL WALL
Having used the grab rail as a guide,
drill holes for screws,
(or supplied wallplugs if solid wall).


FIT GRAB RAIL
Fit the grab rail onto the wall using
the screws supplied where practical.
(Using supplied wallplugs if solid wall).


SCREW STOOL TO FLOOR
Align bath lift parallel to the grab rail,
adjust the height, drill & screw the
feet to the floor.


ADJUST TENSION
Wind excess belt around the rail bar
and slot into the grab rail cradles.
Test the complete bath lift installation
for security before use.

bath lift english bath lift french bath lift german bath lift British Made bath lift CEN logo bath lift action Valid HTML 4.01 Transitional Valid CSS!
Molly Bather Limited. 49A Littlemarsh, Semington, Trowbridge, Wilts. BA14 6JF, UK . Tel: 01380 870649 . Fax: 01380 871056 . VAT: 639710522 . Reg: 5134125